Trying out Fireworks Shooting

Happy New Year!!!

And we celebrate new year with fireworks.
After reading tips on how to photography fireworks from a website, took my cam and dusted tripod, joined some friends of mine at Desa Parkcity for some awesome fireworks performance during New Year Eve.

Travelling around the venue, we've spotted the forbidden area where the fireworks will be launched. So for sure, the best view spot would be directly facing the launching site, where the area was already full with people waiting for the countdown.

Not much choice left, so we choosed a slope beside a lamp post, which is a VERY BIG MISTAKE. But then, what choice do I have?
So with a little bit of test drive, tried to avoid the lamp post in my framing, but still, the flare from the light still appears in most of my photo.
Framing using portrait style is good, with the lake included, despite all those idiots walking around.


So the fireworks begun.
At first I forgot about my ISO setting, which is at ISO1600. Noise, and too overly exposed.


Tried using ISO100, too dark.

Fireworks do not look nice too if shoot using long exposure time.

Darn those heads below... hahaa..

Then I was satisfied with ISO400. Exposure time can be set between 1s-4s, with photo properly exposed and complete fireworks.




Still, sometimes i was lost in the rhythm of the fireworks (I was using 2s timer to reduce effect of shutter pressing).

Main problem will be the smokes produced by intensely shooting fireworks until it affected the fireworks.


Then, the intensely fireworks also do not look nice in my shooting. Wonder why is that..

Probably it's because I lost the MOMENT!!! >>>which is failure to follow the rhythm of the fireworks..

In later stage I was already thinking, what the hell. Just let it shoot, I'll just keep pressing the shutter and let me enjoy the show.
And so the tips is, just let the camera there, click it, let it shoot while you enjoy the live fireworks. Hahaha..
I like this out of all shots. Fireworks fall like meteorites falling from the sky.



One of my favourite shot of the day too:

Sky with Kung Ming lantern.

And a kid sitting beside us during the fireworks performance. He looked so cute when he saw fireworks performance from another venue.


This belongs to one of my friends shooting at KLCC that day. I like her framing...
http://www.facebook.com/media/set/?set=a.10150493678157566.397118.649102565&type=3


Have a very happy new year ahead!!
Read more...

Motion blur, camera shaking and out of focus

Sorry for this late post about photography knowledge. Been busy lately… Just FYI, I will be going to an event shooting this Sunday at Setapak. It’s about a musical festival, but the details I am not very sure for now. Feeling exciting about it as it’s my 1st paid shooting… Hehe…

Ok, lesson for today is blurriness in photo.

I know I know, most of u know how to take photo and u know about blurriness, if the photo is blurred, then it means something wrong and then u re-take de photo again. Then it blurred again. Then u shoot again until u get something u satisfy when u check in the little LCD screen of your camera. But then when u view it in your computer, the photo is blurred!

Why is this happening? Well, because u didn’t trouble shoot correctly. Do u know what’s wrong in the photo? And how can u improve the quality of the photo?

Other than during outing, most of the people take photos during low light situation, for example, in door party. When u’re shooting using digital compact (or even higher level camera), there r some limitation of the camera, your technique, or a combination of both. Blurriness in photo can be due to three main reasons, which is object’s motion blur, camera shaking and out of focusing.


Obviously, motion blur are referring to the motion of the object causing the blurriness in the photo. This may be due to fast movement of the object or long shutter time. In long shutter time, even the slightest movement of the object can cause an obvious blurriness in the photo. Camera shaking will also cause blurriness in a photo. It is common than human’s hand would shakes and normally when the shutter speed is longer than 1/30 we tends to shake when we r holding the camera. It also happens when we r pressing the shutter too hard.

How do we differentiate motion blur and camera shaking? Look at the photo below:



A drummer is hitting his drum rapidly and both photos were taken under low light condition. In the left photo, the drum and other stagnant objects are clearly seen, sharp, without any blurriness but the drummer is blurred. U can’t even c his face clearly. As for the right photo, the whole photo is blurred and u can notice that the blurriness of all objects has a same direction.
Well I think u might have guessed it now, the blurriness in the left photo is motion blur, while the right is due to camera shaking.

Now we knew what caused the blurriness, how can we reduce such blurriness?

For motion blur, use a higher ISO/shorter shutter speed or simply ask the object to stop moving (if situation allows… T.T)
For camera shaking, use a higher ISO/shorter shutter speed/switch on the image stabilizer or similar function on your lens if u r using Prosumer or DSLR/hold the camera the correct way/use a tripod/lean against a stable support if without tripod/ask someone with a steady hand!
One more common tip, USE YOUR FLASH!!! Although I normally don't like the effect of using flash. It spoils de mood and ambience of the photo.

For more details, u can refer to previous entries about ISO and shutter speed.

Let’s compare the next two photos and c if u can notice which kind of blurriness it is.



The left photo is blurred due to out of focus. Although almost all cameras have a function known as auto-focus, but in situations where the contrast between the object and background is not big (due to low light situation/complex colour/object is not outstanding compare to background) the function might not be working properly. Some users also never check the focus point of the shots or do not even let the camera having the time to focus.

For DC/Prosumer users, most models now will focus when u half press the shutter. Normally u would hear a beep/deed sound when the camera locks its focus and a box showing the focus point will appear on the screen. Check if the camera had got what u want to focus on. Release the shutter and half-press again to focus again until the focusing is correct then only fully press the shutter.
As for Prosumer/DSLR, when the camera is in auto-focus mode, the focus point focused will blink in your view finder. U can switch the focusing to the nearest focus point to guide the camera. If u are using live-preview mode, some additional controls might be required for auto-focusing and it is best to read the camera’s manual for guidance. During manual focus, a tip to achieve better focusing is the zoom to the object and adjusts the focusing. With more practice, manual focusing can be far better and faster than auto-focusing.

It is advised that u check the shot straight after u’ve taken your shots. Magnify a few times onto the object of interest and check whether the image is sharp or not. If not, re-take the shot.

Thank you for your time. I hope u learn something today and take better shots next time!

P/s: would like u all to take some time to leave comments so that I can improve my blog. Critics and suggestions are welcomed. And it would be a pleasure if u can help to answer the survey on the sidebar..





Read more...